Temoryan » Product

Fruit Boxes Products

Wed, 13 May 2015 09:33:18 +0000

EPS Fruit Box with cover for 7 Kg, size: 39 cm x 31 cm x 16.8 cm

EPS Fruit Box without cover for 15 Kg, size: 53.8 cm x 37 cm x 21.5 cm

EPS Fruit Box with cover for 10 Kg, size: 53.8 cm x 38.8 cm x 20.8 cm
EPS Fruit Box with cover for 25 Kg, size: 60.6 cm x 41.8 cm x 26.3 cm

Fruit Boxes Advantages

Wed, 13 May 2015 09:32:39 +0000

Easy Transportation: Transportation of fruit and vegetable is still a major problem in Afghanistan and the mentioned items can’t be transported from place to place properly. It not only affects interior business of fruit and vegetable, but also their export abroad. One of the reasons is improper packing; especially, using wooden boxes which have unfavorable tough and heavy structures that damage the goods that are transported through unpaved routes by them.To solve the problem polystyrene boxes could be sued instead of wooden and plastic boxes and cartons.
Protection against Hot and Cold Weather: These boxes due to their structures that are made of expanded polymers are appropriate options for protecting fruit and vegetable at the time of transportation and storage. Polystyrene boxes due to lower thermal conductivity than wooden and plastic boxes and cartons are the most incomparable options.
Protection against Physical Damages: Polystyrene boxes not only don’t damage fruit and vegetable, but also due to their softness and lightness protect them from pressing at the time of transportation and storing the boxes on each other and this characteristic prevents such goods from squeezing and wasting.
Exporting According to the World Standards: Presently exporting of fruit and vegetable must be according to world standards: Preservation of Quality with the Best Condition Protection against Infection Standard and Reliable Packing Polystyrene boxes are according to world norms. Using polystyrene boxes countries whichexport fruit and vegetable have achieved good marketing for their products. And China could be mentioned as an outstanding example.
Retaining Fruit and Vegetable Quality While Transporting: In case of long way transportation and other effective circumstances such as temperature that spoils fruit and vegetable, polystyrene boxes are the most reliable options. These boxes save inside materials against hot and cold weather, water at the time of raining and physical damages at the time of taking them from place to place. In case of elongation of time of transportation, changes don’t take place in quality of fruit and vegetable, comparing to other boxes and this characteristic on its own is valuable about saving such goods.

Address :
Factory: Nasagi Bagrami, Kabul
Office: Taimani, Street 9 (Moi Mubarak), Kabul
Call: 020 250 2024, 078 854 3350 austrotherm@temoryan.com

Polystyrene Insulation Boards EPS 100

Sun, 03 May 2015 10:50:56 +0000

High pressure resistant thermal insulation board made of expanded polystyrene foam.

Color: White
Surface: 0.5m x 1m, 1m x 1m, 1m x 2m
Thickness: 2cm to 30cm
Compressive stress (at 10% compression): 100kPa
Flameability: B1 (hard burning)

Apparent density EPS 100: 18 – 22 kg/m³
Thermal conductivity: λD = 0.038 W/(mK)

Application: Thermal insulation board for areas with high pressure loads (under floor, the flat roof, sloping roof, under floor heating, refrigerators).

Advantages: Good thermal insulation properties, low water absorption and dimensional and shape stability.

Polystyrene Insulation Boards EPS 150

Sun, 03 May 2015 10:50:39 +0000

High pressure resistant thermal insulation board made of expanded polystyrene foam.

Color: White
Surface: 0.5m x 1m, 1m x 1m, 1m x 2m
Thickness: 2cm to 30cm Compressive stress (at 10% compression): 150kPa
Flameability: B1 (hard burning)

Apparent density EPS 150: 22 – 33 kg/m³
Thermal conductivity: λ_D = 0.034 W/(mK)

Application: Thermal insulation board for areas with high pressure loads (under floor, the flat roof, sloping roof, under floor heating, refrigerators).

Advantages: Good thermal insulation properties, low water absorption and dimensional and shape stability.

Polystyrene Insulation Boards XPS

Sun, 03 May 2015 09:44:17 +0000

Pressure-resistant thermal insulation board (XPS) made of extruded polystyrene foam with shiplap. The XPS insulation board provides energy savings, thermal insulation, from the basement to the roof.Just where extreme pressure and moisture stress, particularly high demands on the insulation materials, the extruded polystyrene (Short form XPS, named after extruded polystyrene foam) is the ideal solution for numerous applications. Such as perimeter and base insulation, flat roof insulation, insulation under the soil plate, in wet areas, etc.

Color: green ODE, pink Austrotherm
Thickness: 3cm, 5cm, 10cm Surface: 125cm x 50cm
Available surface: 0,75m²/board
Flameability: B1 (hard burning)
Compressive stress (at 10% compression): 300kPa

Apparent density XPS: 30 – 45 kg/m³
Thermal conductivity: λ_D = 0,033 – 0,037 W/(mK)

Application: Basement wall outside, above and below ground-plate, for inverted roof, terrace- and parking-roof, in a humid area, Plus Duo-roof, Core insulation.

Advantages: largely water resistant, best ecological property (cell content air), excellent thermal insulation, suitable for promoted residential building.

Elastic Joint S-T1

Sat, 02 May 2015 19:18:29 +0000

One-component sealing joint-cutting putty, based on water polymere dispersion. It hardens through water evaporation, makes permanently strong, plastic-elastic connection. It corresponds to the requirements of construction putties of type F, for class 12,5 E according ISO 11 600.

Color: White
Packaging: 12kg, 45kg
Base: acrylate emulsion
Consistency: thixotropic paste Density: 1.3 – 1.35 g/cmł
Thermal endurance: -20 °C/ +100 °C (after hardening)
Thermal resistance: +5°C (during transport musn´t freeze)
Thermal range of application: +5°C / +30°C
Time of skinning: 15 min (at 20°C / 50% humidity)
Time of total hardening: 1-2 weeks

Application: For grouting of prefabricated buildings and claddings. Joint width min. 5 mm, max. 40 mm. External and internal sealing joints in wall and ceiling structures, sealing of connection joints between concrete and metal frames, stairs, masonry, etc.

Advantages: Freezeproof, resistant to moisture, water and weather, to recoat with acrylic and dispersion paints, high adhesion to a variety of building materials.

Icoper

Sat, 02 May 2015 18:28:30 +0000

One-component continuous membrane in acqueous emulsion resistant to water stagnation. It is ideal to impermeabilize flat surfaces and roofing in general, eaves, gutters, chimney-pots, walls, facades, old bitumen coats, metal sheets, prefabricated parts.

Waterproofing of: roofing in general, old bitumen coats,foundation walls, earth retaining walls, eaves, gutters, concrete terraces, chimney- pots, roofs, walls, facades, roofing insulating systems made of polyurethane foams, flower pots and hanging gardens, concrete basins aimed at containing of non-corrosive and non-potable waters.

Baumit Baumacol Proof

Sat, 02 May 2015 18:00:45 +0000

Waterproof, permanently elastic seal. Baumacol Proof is a single-component, ready to use sealing film. For indoor use. It can be applied with a roller or spread on directly under ceramic wall tiles in showers, etc.

Color: Yellow
Bucket = 7 kg, 85 buckets / palete = 595 kg
Consumption: app. 1.5 kg / m² in one coat Layer thickness: 1-2 mm
The waiting time between coats: approx. 2 hrs.

Advantages: Solvent-free, waterproof, permanently elastic, seam and joint-free seal.

Baumit Baumacol Protect

Sat, 02 May 2015 17:59:47 +0000

Sealing slurry for the creation of seam and jointfree seals. Hydraulically hardening, waterproof, yet water permeable flexible single-component sealing slurry for the creation of seam and joint-free seals. Sealing slurry for outdoor and indoor use.

Color: Grey
Bag = 18 kg, 48 bags/pallete = 864 kg
Consumption: 1.5 kg /m² /1mm
Water consumption:
– for trowelling = 5.85 l/bag
– for coating = 6.75 l/bag

Thickness: 2 mm
Tiling: after 24 hrs
Workability: 60 minutes
Drying time: after the first application about 2 hrs

Application: Jointless insulation directly under the ceramic tiles on balconies, terraces, in swimming pools, bathrooms, etc.In addition to conventional substrates it is also suitable forsubstrates such as metal sheet, wood, particle board, or plastic.

Advantages: Waterproof, single-component, flexible.

Baumit Grund

Sat, 02 May 2015 17:56:56 +0000

High quality, solvent-free, synthetic resin dispersion-based primer as a means of absorption compensation and bonding agent. For absorbent substrates such as cement and calcium sulphate coatings, raw concrete ceilings etc. with very good penetration ability. Asa system component for Baumit liquid putties such as Baumit Baumacol Proof and Baumit Baumacol Protect.

Color: Blue
Canister = 5 kg, 1 pal = 96 pcs = 480 kg
Consumption: 0.15 kg/m²
Spreading capacity: 32 m²/5 kg
Maturing time on absorbent substrates: 15min

Advantages: For all substrates, good penetration ability, solvent-free.