Color: White
Surface: 0.5m x 1m, 1m x 1m, 1m x 2m
Thickness: 2cm to 30cm
Compressive stress (at 10% compression): 100kPa
Flameability: B1 (hard burning)

Apparent density EPS 100: 18 – 22 kg/m³
Thermal conductivity: λD = 0.038 W/(mK)

Application: Thermal insulation board for areas with high pressure loads (under floor, the flat roof, sloping roof, under floor heating, refrigerators).

 
Advantages: Good thermal insulation properties, low water absorption and dimensional and shape stability.

Color: White
Surface: 0.5m x 1m, 1m x 1m, 1m x 2m
Thickness: 2cm to 30cm Compressive stress (at 10% compression): 150kPa
Flameability: B1 (hard burning)

Apparent density EPS 150: 22 – 33 kg/m³
Thermal conductivity: λ_D = 0.034 W/(mK)

Application: Thermal insulation board for areas with high pressure loads (under floor, the flat roof, sloping roof, under floor heating, refrigerators).

Advantages: Good thermal insulation properties, low water absorption and dimensional and shape stability.

Pressure-resistant thermal insulation board (XPS) made of extruded polystyrene foam with shiplap. The XPS insulation board provides energy savings, thermal insulation, from the basement to the roof.Just where extreme pressure and moisture stress, particularly high demands on the insulation materials, the extruded polystyrene (Short form XPS, named after extruded polystyrene foam) is the ideal solution for numerous applications. Such as perimeter and base insulation, flat roof insulation, insulation under the soil plate, in wet areas, etc.

Color: green ODE, pink Austrotherm
Thickness: 3cm, 5cm, 10cm Surface: 125cm x 50cm
Available surface: 0,75m²/board
Flameability: B1 (hard burning)
Compressive stress (at 10% compression): 300kPa

Apparent density XPS: 30 – 45 kg/m³
Thermal conductivity: λ_D = 0,033 – 0,037 W/(mK) 

Application: Basement wall outside, above and below ground-plate, for inverted roof, terrace- and parking-roof, in a humid area, Plus Duo-roof, Core insulation.

Advantages: largely water resistant, best ecological property (cell content air), excellent thermal insulation, suitable for promoted residential building.

Color: White
Surface: 0.5m x 1m, 1m x 1m, 1m x 2m
Thickness: 2cm to 30cm
Flameability: B1 (hard burning)

Apparent density EPS-F70: 15 – 18 kg/m³
Thermal conductivity: λ = 0.040 W/(mK) = 0.29 [BTU in /ft2.hr.°F]

Properties: Highly thermally insulating, dimensionally exact, form retentive and resistant to ageing, non-shrinking, hardly flammable. Free of CFCs, HCFCs and HFCs.

Application: As an exterior wall heat insulation composite system for the facade of newand existing buildings.

Advantages: Good thermal insulation properties,low water absorption and dimensional andshape stability.